#
#  plaid_unikin_n45.stm
#

stim_type  plaid     # Direction tuning
stim_samp  1000.0    # Stimulus sampling rate
stim_mean_zero  0    # Stimulus value range, 0-[0,1], 1-[-1,1]
stim_form 3d

st0          0.000   # start time (s) sine1
stn        100.000   # duration (s) sine1
cx1          0       # Center of aperture along x-axis (deg)
cy1          0       # Center of aperture along y-axis (deg)
cx2          0       # Center of aperture along x-axis (deg)
cy2          0       # Center of aperture along y-axis (deg)
dichoptic    0       # 2-split between two eyes (0-L, 1-R, 2-split, 3-Both,
                     #   4-Disparity                       
sf1          1.0     # Spatial period (cyc/deg)
sf2          1.0     # Spatial period (cyc/deg)
phase1       0       # Degrees
phase2       0       # Degrees
tf1         15.62    # Temporal frequency (cyc/sec)
tf2          0.0     # Temporal frequency (cyc/sec)
size         3.5     # Degrees of visual angle
aptype       1       # Aperture type
contrast1    0.50    # Contrast
contrast2    0.50    # Contrast
maxlum       1.0     # Maximum luminance
bgval        0.5     # background value [0..1]
direction    0       # direction (use this as base direction)
theta1       0       # direction relative to 'direction'
theta2     -45       # direction relative to 'direction'
stim_nrpt    1       # Number of repeats


### Parameters below are controlled by the model during execution
stim_frame_xn           128     # x size (pixels)
stim_frame_yn           128     # y size (pixels)
stim_frame_tn           128     # t size (image frames)
stim_frame_sscale        0.03   # spatial scale (deg/pix)
stim_frame_tscale        0.002  # temporal scale (s/frame)
stim_frame_binoc_dxn    16      # width of space between frames (pix)
stim_frame_binoc_amp     0.0    # luminance of space between frames